|
CUSTOMERS
OUTSIDE THE USA AND CANADA SHOULD PROCEED TO ROLLINGRIVER
DESIGNS !!!!!!!!!!!!! FALLING DOLLAR !!!!!!!!!!!!!! |
~~~~~~~~~~~~~~~~~~~~~~~~~~
ON JUNE 1 , 2008 DUE TO OVERALL INCREASE IN ON JUNE 1 , 2008 DUE TO OVERALL INCREASE IN MATERIAL COSTS THERE WILL BE A 5% PRICE INC
ESE IN ALL MAST MATE PRODUCTS MOSTS THERE WILL BE A 5% PRICE INCRESE IN ALL DUCTS
|
DUE TO THE INCREASE IN MATERIAL COSTS, AS OF JUNE 1, 2008 ALL MAST MATE PRODUCTS WILL HAVE A 5% PRICE INCREASE
|
MAST MATES ARE AVAILABLE IN THE FOLLOWING sizes:
|
27' .......... $220.00 + S&H |
|
|
|
|
|
50' ......... $385.00 + S&H
|
| Custom Sizes @ $11.00 /ft |
.
|
.
Shackles , Storage Bag and 2 stiffeners Included. Customer Supplies Track Slides, available at sail makers and marine stores. 27ft------- 19 slides 35ft-------25 slides 42ft------30 slides 50ft------36 slides |
WHAT LENGTH DO YOU NEED?
Assuming you can easily climb up on your boom, the length Mast Mate you need is the distance from your mast head to your boom, the "P" measurement of your main. Go to Bacon Sails boat specs Database and check the P specification. If not listed, the easiest way to make this measurement is to attach a light line to your main halyard, hoist it to the top, put a piece of tape on the line at the boom, or further down if you need a step or two below the boom, lower the halyard and measure the line. It is OK if a standard length Mast Mate is a bit too long, the excess just lays on deck.
.
.
TO ORDER ; FILL OUT FORM OR CALL 800-548-0436
VISA / MASTERCARD / AMERICAN EXPRESS .
|
(* - signifies required fields) |